Home / Blog / Logic puzzles / Binary Puzzle Rules: How to Play (With a Printable Example)

Binary Puzzle Rules: How to Play (With a Printable Example)

Last updated: .

The rules of a binary puzzle are short: fill the grid with 0s and 1s, with no three identical digits in a row, the same number of 0s and 1s in every line, and no two identical lines. This page explains each rule with a small picture of what breaks it, then solves a real 6 x 6 puzzle from the first digit to the last.

What a binary puzzle is

A binary puzzle, also called Takuzu or Binairo, is a square grid in which some cells already contain a 0 or a 1. You fill the empty cells with 0s and 1s. There is no arithmetic and no word to know: every cell is decided by comparing it with the cells around it in the same row and the same column.

The three rules

Rule 1: no three identical digits in a row

In a row or in a column, you may have two 0s side by side, or two 1s side by side, but never three. So 0 0 1 0 1 1 is allowed and 1 1 1 0 0 0 is not. This rule applies in both directions, so a column such as 1, 1, 1, 0 is also wrong.

Rule 2: as many 0s as 1s in every line

Each row and each column holds exactly the same number of 0s and 1s. In a 6 x 6 grid that is three of each, in an 8 x 8 grid four of each, and so on up to six of each in a 12 x 12 grid. The rule is useful in two ways: it tells you when a line is finished, and it tells you what the rest of an almost finished line must be.

Rule 3: no two identical rows, no two identical columns

Two rows may share many digits, but they may never be exactly the same. The same is true for columns. A row can be equal to a column; only rows are compared with rows and columns with columns. In practice it mostly matters near the end of a puzzle, when a line has just two empty cells left.

A worked example

Here is an easy 6 x 6 puzzle made by the LogikLand generator, with its solution next to it. It has 9 digits given and 27 empty cells.

An easy LogikLand binary puzzle (6 x 6) and its solution. Download the printable PDF

Solving it, rule by rule

  1. Rule 1, a gap between two identical digits. Row 1 reads 0 _ 0. If the empty cell were a 0 we would have three 0s in a row, so it is a 1. In column 1, the 1 in row 4 and the 1 in row 6 have an empty cell between them: row 5 of column 1 must be a 0.
  2. Rule 2, counting. Row 5 now has three 0s (columns 1, 3 and 6), which is all a 6-cell row may hold. All its other cells are 1s: columns 2, 4 and 5.
  3. Rule 1, a pair. Once row 6 is filled up to 1 0 1 1, the two 1s in columns 3 and 4 form a pair. A third 1 next to them would break rule 1, so the cell in column 5 is a 0. Row 6 now has three 1s, so its last cell is a 0 too.
  4. Rule 3, no identical columns. Late in the puzzle, column 3 is complete (0, 1, 0, 1, 0, 1) and column 1 has two empty cells, in rows 2 and 3. Filling them with 1 then 0 would make column 1 identical to column 3. So row 2 gets the 0 and row 3 gets the 1. Column 2 and column 5 give the same kind of choice.

In this puzzle the three rules are all needed: the first two do most of the work and rule 3 settles the last four cells of the first two columns.

Tip

Work in pencil and check both directions every time you place a digit. A digit that is correct for its row can still break its column.

Grid sizes and levels

The Binary Puzzle assistant sets the level by the size of the grid. About a quarter of the cells are given at every level, so a bigger grid simply means more digits to find. The last column comes from a sample of 60 puzzles per level that we generated while writing this article.

LevelGridDigits given in our sample
Easy6 x 6 (36 cells)6 to 12 (average 9)
Medium8 x 8 (64 cells)11 to 19 (average 16)
Hard10 x 10 (100 cells)20 to 30 (average 25)
Expert12 x 12 (144 cells)30 to 38 (average 35)
Levels of the LogikLand Binary Puzzle assistant. Digits given: sample of 60 puzzles per level, October 18, 2026.

Why there is only one answer

A puzzle with two valid answers is unfair, because logic cannot choose between them. LogikLand builds each grid backwards: it starts from a complete grid that follows the three rules, then removes digits one at a time. A digit is only removed if a solver that uses only the three rules above can still rebuild the whole grid. So every puzzle can be solved by logic alone, and you never need to guess.

Making a book of binary puzzles

LogikLand has no free single-puzzle tool for binary puzzles. To make a book, create a free account and open the Binary Puzzle assistant. You choose the levels and how many puzzles each one gets, 1, 2 or 4 puzzles per page, and 1, 2, 4 or 6 solutions per page. You can add a "How to play" page: a detailed guide, a short page or none. Our suggestion, not a rule: start a book with a few 6 x 6 puzzles so that new solvers learn the three rules before the 10 x 10 grids.

Create a free account to make a full book

Create a free account to open the assistant. To get faster at the puzzle, read how to solve a binary puzzle and advanced binary puzzle techniques.

Questions

Do I need to do any maths?

No. The only counting is "how many 0s and 1s are already in this line", and the numbers are small: 3 of each in a 6 x 6 grid, 6 of each in a 12 x 12 grid.

Can I use 0 and 1 in any order I like?

Only if you respect all three rules at the same time. A line such as 0 0 1 0 1 1 is fine. A line such as 0 0 0 1 1 1 is not, because it has three 0s in a row.

Is a binary puzzle the same as Takuzu or Binairo?

Yes, those are other names for the same kind of puzzle: a grid of 0s and 1s with the same three rules.

Sources

Want to publish your own puzzle book?

LogikLand generates Sudoku, crossword, word search and maze books for Amazon KDP, in 8 KDP trim sizes from 5 x 8 to 8.5 x 11 inches, plus A4 and 8.5 x 8.5 square, exported as a PDF or an editable PPTX file. Commercial rights come with the PRO and EXPERT plans.

Related: All blog articles | Try the tool | All free puzzle generators | More Logic puzzles articles