Home / Blog / Logic puzzles / Advanced Nonogram Techniques for Harder Grids

Advanced Nonogram Techniques for Harder Grids

Last updated: .

Advanced nonogram techniques are not tricks that replace logic. They are faster ways to run the same line-by-line reasoning: place the runs as far left and as far right as they can go, split a line at its dots, join shaded squares that must belong together, and manage a big grid without losing your place. This page explains each one with lines checked against an exhaustive solver.

What "advanced" means here

LogikLand's nonograms are built so that a solver which looks at one line at a time can complete every grid. The Hard level is 20 x 20 and the Expert level is 25 x 25. In a sample of 60 Expert grids we generated for this article, no line had more than 7 numbers. So the challenge of the larger levels is the amount of work, not a deeper kind of logic. The methods below cut that work down.

The left-right method

For one line, with only its numbers known (no squares marked yet):

  1. Place every run as far to the left as it can go, with one empty square between runs.
  2. Place every run as far to the right as it can go.
  3. Compare the two placements run by run. Any square covered by the same run in both placements is shaded for sure.

This is the slack count of the previous article turned into a picture. We tested it against an exhaustive solver on 2,209 random blank lines of 8 to 25 squares, and the squares it marked were exactly the squares that are shaded in every possible arrangement, with no difference. When there are marked squares in the line, the same idea works between them and the nearest dots.

A real line from a 20 x 20 grid

Here is a Hard puzzle from the LogikLand generator. Look at row 19, which reads 6 4 6.

A Hard LogikLand nonogram (20 x 20). Row 19 reads 6 4 6.

The three runs and two gaps take 6 + 1 + 4 + 1 + 6 = 18 squares of 20, so the slack is 2. Here are the two placements, with # for a shaded square and . for an empty one:

square    1   5    10   15   20
left      ######.####.######..
right     ..######.####.######
sure      ..####...##...####..
The clue 6 4 6 on a line of 20 squares. In the last row a dot only means "not decided yet". Squares 3 to 6, 10 and 11, and 15 to 18 are shaded whatever the arrangement.

That is 4 + 2 + 4 = 10 squares found without looking at a single column. A lone 6 in a 20-square line would give no sure square at all, because its slack is 14. Here the three runs share one slack of 2, so each of them is pinned.

Dots split a line into gaps

A dot in the middle of a line cuts it into separate gaps. Each run must fit entirely inside one gap, and the runs fill the gaps in order. We checked these cases with the exhaustive solver:

Clue and dotReasoningResult
5 2, dot in square 4The left gap (squares 1 to 3) is too short for the 5, so the 5 and the 2 both go to the right of the dot, where they fill 8 squares exactly.Squares 5 to 9 and 11 and 12 shaded, the rest dotted
4 3, dot in square 6If the 4 sat to the right of the dot, the 3 would not fit after it, so the 4 is in squares 1 to 5.Squares 2 to 4 shaded
Lines of 12 squares with one dot. Results checked with an exhaustive solver, October 18, 2026.

The rule to remember: ask "could this run fit in this gap?" for each run and each gap. A run that fits in no gap but one has found its home.

The end of a line

If the first square of a line is shaded, the first run starts there. For the clue 2 3 1 in 12 squares with square 1 shaded, the 2 covers squares 1 and 2 and square 3 is a dot. The same holds from the right end.

Joining shaded squares, and its trap

Two shaded squares with unknown squares between them may belong to the same run. If only one run is long enough to reach from one to the other, they do. With the clue 6 2 in 15 squares and squares 3 and 7 shaded, only the 6 can span them, so squares 3 to 7 are all shaded. The run also cannot start before square 2, so square 1 is a dot.

The trap

With the clue 3 3 in 15 squares and squares 4 and 6 shaded, you cannot join them: they could be one run (squares 4 to 6) or two different runs with square 5 between them. We checked with the exhaustive solver: only square 1, which must be a dot, is added to the two squares you started with. Always ask whether a second run could take one of the two squares.

Working on 20 x 20 and 25 x 25

  • Use the thick lines. LogikLand draws a thicker line every 5 squares. Count in fives, and note where a run starts in terms of those blocks.
  • Sweep, then follow the changes. Do one slow pass of all rows, then all columns. After that, return only to the lines that changed.
  • Prefer low slack. On each pass, solve the lines with the fewest free squares first. Their results unlock the others.
  • Cross out finished numbers. A long clue is easy to misread. Crossing out runs you have placed shortens it.

In the assistant, a book that contains Hard or Expert grids has one grid per page, so there is room for your notes in the margins of the page you print.

Hard and Expert grids in a book

LogikLand has no free single-puzzle tool for nonograms. Create a free account and use the Nonogram assistant to make a book with 20 x 20 or 25 x 25 grids. Our suggestion, not a rule: in a 25 x 25 book, print one page and time yourself before you add many more, because these grids take much longer than the Easy 10 x 10 ones.

Create a free account to make a full book

Create a free account to open the assistant. If the slack count is new to you, read how to solve a nonogram first, and the basics in the nonogram rules.

Questions

Do Expert nonograms require guessing?

No. LogikLand keeps a grid only if a line-by-line solver finishes it. Every Hard and Expert grid can therefore be solved with the techniques of this page, applied patiently.

What is the most useful habit on a big grid?

Keep a note of which lines you have already worked on after the last change in their crossing lines. On a 25 x 25 grid there are 50 lines, and re-reading them all is the slowest part.

Is it worth shading in pencil lightly at first?

Our suggestion: yes, but only for squares you are sure of. For unsure squares, use a tiny mark in a corner and rub it out at the end.

Sources

Want to publish your own puzzle book?

LogikLand generates Sudoku, crossword, word search and maze books for Amazon KDP, in 8 KDP trim sizes from 5 x 8 to 8.5 x 11 inches, plus A4 and 8.5 x 8.5 square, exported as a PDF or an editable PPTX file. Commercial rights come with the PRO and EXPERT plans.

Related: All blog articles | Try the tool | All free puzzle generators | More Logic puzzles articles